Live Aboard MacroEconomics: A Case Study

 

WAYWARD earning her keep

As you live your life aboard a vessel, be aware of the sea of life on which it floats and on which it moves forward.

— Ian Gardner (as remembered)

Whatever floats your boat!

-- Sailorspeak

Live Aboard MacroEconomics: A Case Study

LUTRA, the boat we're currently building, offers an as-of-today set of numbers to puzzle over.

Numbers, of course, are slippery li'l devils. What counts in or out? Round up or down? Will the future hold the course? Nonetheless, it's worth a look! Here, I'll take a bird's eye look at up-front dollar costs of our live-aboard vessel relative to rent. 

So LUTRA. Our labor is 'free' (ha!). Time is probably about 6 months of steady, optimal workdays... spread across a year and a quarter in our actual context. Let's say 3000 person-hours (2 persons x 8 hours/day x 180 days, rounded up). The time investment itself hurts less than time lost cruising at large!

When all the dust settles, we arrive at two figures for her out-of-pocket cost. For building site, construction and materials of the hull and furnishings, around $5K is pretty close. Mind you, this is still semi-remote, so costs are high. That's the easy part.

Where it gets complicated is in evaluating outfit, gear and copper we're carrying forward from WAYWARD (and earlier boats!). 

WAYWARD's copper plate was originally a whopping $10K in 2014 dollars. We figure that it paid for itself in about 5 years, saving a rugged alternative finish (e.g., fiberglass/resin), anti-fouling paint, haul-outs and associated costs, repairs, on-board insurance, etc.. After 10 years aboard WW, we used half of it and her chine angles for LUTRA.  Each half is worth around $4K as #2 scrap in 2025 dollars defraying the original outlay.

Similar calculations go for anchors, chain and rode, a pile of fasteners, piano hinges, coms, nav lights and other gear.

So... um.... I'm going to say $1K for these components. Neither replacement value nor market value, but a nod toward what might have been an expensive heap if it hadn't already paid for itself. 

That brings LUTRA's up-front dollar cost to ~$6K.

We're building in our home port of Tenakee, Alaska. Currently, property is well out of our reach. Rents are running around $1K/month for a studio-ish space, utilities included. IF you can find one open. There are only a handful and chronically occupied.  In a larger town, such as Juneau or Sitka, low-end rents average $2K - $2.5K/month, utilities NOT generally included. Tight there, too, but there're generally more openings coming and going.

So let's start with our local $1K/month. That's $12K per year. LUTRA's build is paid off in 6 months at large, a little more when tied to the dock. If we live-aboard for 10 years, we clear 'savings' - in dollars not spent - of more than $100K in village rent, ~$200K in town rent!

Cash money, unfortunately, doesn't grow on trees. 

Tenakee labor is compensated at $18 - $25/hour. It's not exactly 40 hour work weeks, so can also stretch wider over time. But let's say 200 person-hours ($5K x 1 person-hour/$25) to earn the $5K cash outlay for LUTRA. Let's add to that our 3K person-hours for construction and round up for a conservative 3.5K person-hours.

Still, it's easy to see that 10 years of rent would require at least 4K person-hours at present rates.

So... well, well!... looks like we save time, too, even when calculating the bare rental alternative to living aboard. An even better dollar deal if we had bought a vessel, rather than DIY.

That being said, while DIY construction plays a role in all this there are middle grounds.

Buying a modest fixer-upper and DIY from there will (most likely) drop your time investment considerably, and quite possibly your layout costs, so give that a good look.

But the big money is in living aboard! Sail away from the dock if you can.

***

In reality, all of this is vastly more complicated. We don't begin to examine, here, the costs of gainful employment (commutes, clothing, peer outings, etc. inherent in the alternative). We haven't calculated equity and resale value vs. zero for rentals. We don't know how to count our time entangled in town while building. We haven't considered costs of maintenance and repair. We don't know how to evaluate what we learn while building, and how that pro-rates over the years. We don't know if we'll get that 10 years ahead, much less the 20 or so we have fair reason to hope for.

We keep in mind that, at the end of ten years, we still own our vessel  / home ; it's just another rent-due month for the alternative.

I started this post musing in print. I'm pleased to see that the numbers appear to crunch in our favor in both money (I was pretty sure) and time (surprise!). My sense is that, given a simple, low-overhead lifestyle, living aboard and sailing remote, the numbers tilt even further in our favor.

So don't let a little thing like money stop ya!

Rigged for Success: LOM/Ljungstrom + Quick-Rig Booms

 

MUSTELID's LOM Main and Ljungstrom Foresail

Live life as if everything is rigged in your favor.

-- Rumi

Rigged for Success: 
    LOM/Ljungstrom + Quick-Rig Booms

I'd like to share a suite of ideas toward a family of lesser known rigs for smaller vessels that I think show a great deal of promise. Part historical, part convergent evolution, part innovation, the result is a simple but versatile, robust rig that can be DIYed at low cost.

Leg o' Mutton (LOM) Sails

This tasty moniker simply means a triangular sail. They're commonly used for headsails (jibs, staysails, etc.), mains (often called Bermudan sails) and drivers (small sails set far aft).

Ljungstrom Rig (2 x LOM)

Ljungstrom Rig uses a pair of LOMs, joined along their luffs and set on a free-standing, rotating mast. No booms were used to avoid troublesome impacts with crew.

This configuration works similar to twin head sails off the wind. From a beam reach on up, the sails are doubled over to one side and sheeted as one.

Pros:

• Light, inexpensive spares and gear.
• Quick set/reef, roller un/furling via the mast.
• Sailing off-wind, one side can be jibed for 'instant' 50% reef.
• Sail area aloft catches higher, upper wind-flows.
• Low Center of Effort (CE).
• Twin sails tend to center down the wind.
• Potential for hands-free operation.
• Sail steering is straightforward (haul to the side you wish to sail).
• UV resistant fabric along luff and foot eliminate sail covers.
• Boomstrike is eliminated.

Cons:

• Lack of a boom makes spreading sail difficult (especially on narrow hulls).
• No clew outhaul or vang options.

One more con I'll mention... compared to stayed, headsail LOM rigs, there is no gain from slot effect. I don't list it, however, as stayed vs. unstayed rigs generate their own lengthy pro/con lists which don't add much to this discussion.

Adding a Boom

The addition of a boom set under a loose-footed LOM allows spreading, a clew out-haul and vang, addressing the main cons.

Interestingly, this approach was taken by both the Sea Pearl 21 (adventurously sailed by Stephen and Ginny Ladd, among others), and is marketed as Holopuni Quick-Rig (by Holopuni Canoes). Convergent evolution?

Both of these designs lead their clew outhauls via track along the top of the boom and sheets to the end of the boom. When the sail is reefed, the upward pull of the clew at mid-boom is resisted by the end positioned on the mast and the downward pull of the sheets at boom's end. 

As a sail's belly is blown full, pulling the clew strongly toward the tack, the boom resists in compression. If it is deflected from straight by the perpendicular pull of the clew between mast and sheet lands, that strength plummets. Usual solution? A heavy boom or one made with exotic materials.

Hmm.

What if we oppose sheet and clew tensions by having them meet at the same point? They cancel out, unloading the mid-boom! The clew outhaul - led to boom's end, then turned back toward the mast to the clew completes the picture. A rope grommet - travelling along the boom - is the perfect attachment point... simple, cheap and DIY.

Principle parts of the rigging...
This platform and 'collar' are primitive but functional

How We Go About It

Rotating Mast and Gear

In our small-ish boats, we went with a thumb-sized dowel protruding from the rounded bottom of the mast. This is inserted into a hole in its step - a fixed plate of thick HMD (cutting board plastic). This secures the foot but it allows it to rotate with very little friction. The upper partners are simply a loose-fit, fixed square around the mast. The distance between step and partners should be between 10% (minimum) and 15+% (healthy) of the mast's overall length for adequate cantilever.

A gate can swivel open to free one face for raising/lowering or close and lock to contain it. 'Box' sides at the step hold the foot in place for lowering. A pin led through one side and into a corresponding hole in the lower mast prevents rotation against high winds or rock and roll.

Each boom requires an arrangement that fixes their height above the partners, yet allows the mast to rotate independently. 

Our solution is a platform affixed to the mast with a collar from boom's mast end, around the mast, set above the platform... the collar is not so loose as to slip below the platform, but not so tight as to grip the mast.

Booms

Booms can be quite light, subject to sea trials. 

Each has a rope grommet loosely fit around them (it shouldn't bind when pulled at a flat angle). 

We fix a pinch cleat for the clew outhaul at the boom's mast end, pinch horn down (10deg) toward the distal end. This allows the line to ride over the non-pinch horn (up and toward the mast), under control hands-free as it pays out while furling.

A ring seized to the distal end of the boom turns the outhaul back toward the grommet.

The outhaul leads from its cleat, through the grommet (helps control a slack outhaul) to the turning ring, and back to the grommet. We fix it to the grommet's upper side, allowing a tail which is tied to the clew. We prefer little play between clew and grommet.

The sheet is fixed to the grommet's lower side and led to deck level. A turning device (multiple or travelling for an improved lead?) leads it toward a clear, handy to the crew. We prefer enough friction on the cleat to hold in steady wind but ease in heavy gusts... no lock hitch.

Sails

We used light nylon fabric to build flat-cut sails. These are responsive, and furl neatly around the slightly tapered masts. They are stretchy enough to take on some belly (camber) when full of wind.

Downside is that camber can't be flattened easily in high winds. But reefing is so easy, we can reduce power that way.

For 2xLOMs we screwed the webbed luffs to the mast, but are now considering a pocket for easier installation and removal. Others have found that a simple lanyard from tack to mast is sufficient for furling.

Handling the Ljungstrom

We set the Ljungstrom sail well forward, where it can pull us bow down the wind. 

We don't typically vang our sails to flatten them. Instead, we vary the sheet leads and/or reef a little more than we might. This avoids extra gear, handling and the heavier booms required. Personal call, however. 

Furled Set Up

When furled, the sail is snugly wrapped around the mast. The boom(s), if any, are vertical. Sheets are left slack and hanging. One clew outhaul is marline-hitched once or twice along the mast, securing all the bits, then made fast at its pinch cleat (low).


Setting Sail

Unhitch the outhaul, then refasten to its cleat. Uncoil sheets and lead aft to their cleats. Both outhaul and sheets will go slack as the sail is unrolled. Unpin mast if locked.

Depending on wind, you might wish to round up. For downwind departures, you may have to work in stages, trimming sheets as you go.

Unroll the sail by rotating the mast (we prefer 'righty-tighty; lefty-loosey' as standard... we do this by hand, but various rope windings are possible).

Once unfurled as far as desired, haul the outhaul(s) for the curve you wish, then make fast. Trim sheets and fall off to heading. Backing sail is easy and effective. If you wish to open the sails, do so.

On the Wind

Here the sails are overlapped and are sheeted as one (outer one generally the focus of our attention). They handle pretty much as any boomed LOM.

Off the Wind

Sailing off the wind, the sail is typically balanced like a delta kite. All things being equal, it want s to hold the bow centered downwind. More belly is often a good trade-off against more area.

To steer using sail, haul the sheet on the side toward which you wish to turn (easy, now!). This shortens its force vector and directs it to that side. The opposite sail, now relatively stronger and with a longer lever-arm, works to rotate the hull that-away. Like the reins of a horse!

In a heavy gust, you have a 50% reef at hand. You can jibe one sail (lapping one over the other) or let it fly (this can be harder to retrieve... get a wide angle). But if this comes up, consider roller reefing ASAP. Consider that, in high winds, you don't have to set them wing and wing... they sail well as one.

Odd Situations

If a sudden squall has invited letting both sails fly (they're trailing down the wind from the bow), calmly roller reef until you can bring them in and under control.

If such a situation has reversed their usual sides, don't panic... just hand the sheets around the mast, or refasten them for a fair lead and carry on. The sails won't care.

The whole mast, sails and all, can be furled, hitched up and let over as a sea-anchor.

All in All

We found these LOM/Ljungstrom + Quick-Rig Booms to be simple, cheap, versatile and powerful. Each piece is DIY-able from scavenged materials. Nothing about them couldn't be made in the field, at a pinch.

The lightness of the spars is a BIG advantage, especially as we age. The masts should be manageable for as long as we're likely to be able to row.

In researching the history of the rig, the few who have used it are soberly impressed by its virtues. It is not the fastest rig out there, but its no slouch, and pays its way with easy handling and quick reefing.

I'm hoping to see more of these on the water in the coming years!

Full Ljungstrom / Reefed LOM
Sprit-Boomed LOM Aft

References

Sea Pearl 21 Review by Josh Colvin

About Holopuni Canoes by Nick Beck

Rigging MUSTELID and MUSTELID Voyage by Anke and Dave