Please visit our home site at www.TRILOBOATS.com.

Anke and I live aboard WAYWARD, and wrote about it's design and construction at ABargeInTheMaking.blogspot.com.

Access to the net comes and goes, so I'll be writing in fits and spurts.Please feel free to browse the archives, leave comments where you will and write... I'll respond as I can.

Fair winds!

Dave and Anke
triloboats swirly gmail daughter com

Thursday, January 4, 2018

A DIY Portable Pram

Ken Simpson's CPB-1 Lightweight Folding Pram
Pic from Christine DeMerchant

I love to go a'wandering
Along the mountain track.
And as I go I love to sing,
My knapsack on my back.
- I'll spare you the Fol-de-roos!

A DIY Portable Pram

Many's the time we wish we could haul our dory up to a lake, but swoon at the prospect of lugging our dory uphill and over dale. Or wish for a second ride ashore. Or to float some firewood while we go exploring.

Ken Simpson, a retired engineer of some renown, has some solutions for us.

His site, Portable Boat Plans, offers a number of simple ways to get on the water quickly and have a lot of fun for little outlay. His designs tend toward the minimal, often sacrificing performance for economy and portability. But in the sizes he deals in, the sacrifice is small and the gains considerable.

His Lightweight Folding Prams, CPB-1 (free plans) and updated CPB-2016 (plans available for purchase), are of especial interest.

These two prams are built with coroplast, the corrugated plastic sheet material used for such things as political signs. It is relatively strong for its (light)weight, and, once the edges have been waterproofed, its corrugations trap air for positive buoyancy (it floats). Edges are waterproofed and joined with Scotch(TM) TOUGH (duct) Tape, making construction a snap. Minimal stiffening components are cobbled up from common hardware store items.

The result is a boat which weighs less than 20lbs and stows and carries like a portfolio!

Imagine a fleet of four of these, tucked away on board, ready to be used for kids and other company. As tow-boats for transporting a haul of groceries. As in, "Let's go climb to that mountain lake and paddle around!"

If we pull out all the stops, these might top out at around $100 each. By comparison, a packraft might cost around $600. 

That's a lot of bang for the buck!!


5 comments:

  1. I'm usually one of your first commentators but I can't top that one :-)

    ReplyDelete
    Replies
    1. Spammers are Jenny-on-the-spot, these days! DZ

      Delete
  2. I think that folding pram is worth trying out. I'm going to wait for the summer though.. :-)

    ReplyDelete
    Replies
    1. Hi Alan,

      Probably a good plan, although I think you'll be generally surprised at how reliable they are. Ken makes sure to point out, however, that they are for easy going in fair conditions.

      Dave Z

      Delete
  3. This comment has been removed by a blog administrator.

    ReplyDelete